Loading... Please wait...
Below are the available bulk discount rates for each individual item when you purchase a certain amount
The Eccotemp 40HI-LP is the indoor equivalent to the Eccotemp 40H tankless water heater. The Eccotemp 40HI-LP Tankless Water Heater is designed to supply hot water to a standard three bedroom, two bathroom home. This Eccotemp tankless water heater is an ideal choice for retrofitting your old storage tank heater, or can be plumbed in a new location. In addition, the Eccotemp 40HI-LP tankless water heater is powered by liquid propane which generally carries a lower operating cost than similar electric units and has an energy factor (EF) of 0.82.
Rated at an already impressive 6.3 GPM, the Eccotemp 40HI-LP is also a split system adaptable which can further increase efficiency and hot water delivery speed. With built-in pressure relief filter system and a 10 year warranty, the Eccotemp 40Hi-LP tankless hot water heater is the ideal choice for a standard sized home.
Power:
Up to 135,000 BTU, 110V power supply
Vent and Inlet Measurements:
3 inch vent 3/4 inch water inlet with adapter, 1/2 inch without adapter, 3/4 inch gas inlet
Flow Rate:
Additional Features
Click here for a copy of the instruction manual
Attention*** If you add a Horizontal vent kit to this order here is the information
3" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit for Eccotemp 40HI-LP and 40HI-NG models. It also works Paloma/Rheem models: RTG-42, RTG-53, PTG-42, PH-1, PH-20. This vent kit is supplied with all the necessary components for a quick and seamless installation. It includes the following pieces:
Made of AL-294C stainless steel. This is Category II/III approved
For more details click here
Attention*** If you add a Vertical vent kit to this order here is the information
The 3" or 4" Z-Flex Vertical vent kit is for vertical installations of indoor water heaters using 3" fittings, such as the Eccotemp 40HI, or 4" for some Paloma and Rheem models. It will also work with many boilers. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as condensation drains and back flow preventers. Please click here for more information on the parts, pieces and requirements that you will need.
Includes:
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and IV compliant.
Choose a currency below to display product prices in the selected currency.
All prices are in USD. Copyright 2013 The EnergyStead. Sitemap |










